[Bloodmyst]

TBH, from what I've read on forums. You can reliably overclock the 2500k to 4.5Ghz with air cooling.

As you said, you probably won't overclock, until your system becomes of age. So I's scrap the air cooler for now and just use the stock standard one. No point buying stuff you aren't going to use.

Quick Comments

TCPLemminks:

[TCPLemminks]

So with my current system go with the stock cooler now, and when I'm planning to start overclocking look for an air cooler. Probably better since new models will come out / older models become cheaper.

I'm also in the market for a new mechanical keyboard, prefer ~$140. Cherry Browns.

[Bloodmyst]

I've got a Razer Blackwidow Mechanical Keyboard. It's pretty good. The only complaint I have about it is how noisy it is. When I bought it, I didn't realise you could get a silent version :s

Maynarde has the silent version and he was pretty happy with it iirc.

Really though, I don't think it matters much what mechanical keyboard you get. Tomato = Tamato. If you do care about the noise factor though, I'd recommend the Razer Blackwidow Silent Edition. I think they are fairly pricey though, can't remember how much I paid for mine now.....

There's also a mechanical keyboard (iirc) which is sold on this site, pretty sure you can buy custom keys for it as well. I think thats a pretty neat feature, I love to change my "~" key to a Terran logo key :P

Quick Comments

	TCPLemminks:	Looks good, but for $230 0_o....
	Ruski:	Blackwidow mechanical keyboards so sexy

[|Erasmus|]

Originally Posted by TCPLemminks

So with my current system go with the stock cooler now, and when I'm planning to start overclocking look for an air cooler. Probably better since new models will come out / older models become cheaper.

I'm also in the market for a new mechanical keyboard, prefer ~$140. Cherry Browns.

If you want browns, you need to look at Filco/Ducky/Leopold.

Otherwise if you can settle for blacks, I like the Steelseries 6GV2. Minimalist like the Filco/leopold stuff. No silly macro keys or lights or anything, just a well built mech keyboard. And that one can be found <$100 AUD.

Quick Comments

	Bloodmyst:	Filco! Thats the one I was talking about.....
	TCPLemminks:	I was thinking Flico's too

[TCPLemminks]

Anyone know where I could get Filcos?
I've seen the Ninja version (keys on the sides) for $150, the standard one is around $160+.
I'll also start ordering the build on Friday sans cooler. So are there any last minute improvements I can make to this build?

Quick Comments

|Erasmus|:

auspcmarket are the only ones afaik, and at the prices you listed. can get them imported, but im not sure if it's cheaper.

[TargAFan#1]

http://www.auspcmarket.com.au/products/66/?page=1 Should be some here I think.

[Bloodmyst]

You've check the memory is on the "Memory Compatibility List" for the M'board right? Iirc, it's on there.

Also, that's a pretty decent price your getting that GFX card for.

Anyhow, it's a decent system

[TCPLemminks]

erm the model of memory on my build (F3-12800CL10D-16GBXL) isn't on the Memory Compatibility List.
Should I be looking for a new 16GB RAM then?

[|Erasmus|]

No...

It just means they didn't specifically test that model number. Unless it has some weird memory clock or latency it won't be a problem, in 99% of cases.

[Takiah]

My partner owns Centrecom Computers (Ballarat not Melbourne). I can ask him for quotes etc if you need. He can also build & ship to you

[TCPLemminks]

I'm confused at how it's says it's compatible with the intel Z77 chip set, yet the motherboard is not listed on the qualified qualified motherboard list

Thanks for the offer but I'd prefer not to ship the entire computer as I will have to get extra insurance on it won't I? + send it back if it was damaged.

[TCPLemminks]

Made a post on the Whirlpool forums and here are the adjustments they suggested.

Current build

• Processor: i5 2500K ($225)
• Motherboard: Asrock Z77 Extreme4 ($153)
• Graphics card: Gigabyte GTX 670 ($519)
• Sound card:On board is good enough since the Z77 extreme4 has Realtek
  ALC898 (Comparison)
• SSD: Crucial 128 GB m4 ($170)
• Hard drive: WD 3.5" Blue 1TB WD10EALX SATA3 32M 7200rpm HDD ($99)
• Ram: G Skill 8G(2x4G) DDR3 1600Mhz PC12800 RL 9-9-9-24(CL9D-8GBRL) ($59)
• DVD Drive: LGE BluRay Combo ($54)
• Case: Coolermaster 922M ($118)
• Monitor: Benq GL2250M 21.5"W LED 5ms VGA DVI TILT GlossBlack ($132)
• Speakers: Altec Lansing VS2621 2.1 ($42)
• PSU: Antec HCG 520 ($79)
• Cooler: Cooler Master Hyper 212 EVO w Transparent 12cm ($39)
• Mechanical Keyboard: Ducky DK9008 SHINE (Blue, Cherry Brown switches)($149)

Current cost: $1,838 + $12 Shipping = $1,850

[VB_WhiplashJC]

So much for your budget...

The 670 is overkill for sc2@1080p. Really any card over ~$220 will give you over 60 FPS with maxed out settings.

Quick Comments

TCPLemminks:

What about games coming out?

[TCPLemminks]

Well I'm not planning to just run sc2.

Also is 1mb/s upload fast enough to stream?

[VB_WhiplashJC]

Well yeah, a 670 will destroy anything you want to play, if you can afford it then go for it.

Quick Comments

TCPLemminks:

[TCPLemminks]

Well I started ordering parts and like a giddy schoolgirl was just about to order everything willynilly before Marinehero came in and offered his advice. HUGE shoutout to him for saving me $50 or so^^

means parts are ordered!
Current build

• Processor: i5 2500K ($229)
• Motherboard: Asrock Z77-PRO3 ($119)
• Graphics card: Gigabyte GTX 670 ($515)
• Sound card:On board is good enough since the Z77 extreme4 has Realtek
  ALC898 (Comparison)
• SSD: Intel SSD-330 Series 120GB ($152)
• Hard drive: WD 3.5" Blue 1TB WD10EALX SATA3 32M 7200rpm HDD ($99)
• Ram: G Skill 8G(2x4G) DDR3 1600Mhz PC12800 RL 9-9-9-24(CL9D-8GBRL) ($59)
• DVD Drive: LGE BluRay Combo ($54)
• Case: Coolermaster 922M ($118)
• Monitor: DellTM ST2220L ($135 (sale))
• Speakers: Altec Lansing VS2621 2.1 ($42)
• PSU: Antec HCG 520 ($79)
• Cooler: Cooler Master Hyper 212 EVO w Transparent 12cm ($39)
• Mechanical Keyboard: Leopold FC500R (Cherry Brown switches)($109 + $10 insurance)

Current cost: $1759 + $12 Shipping = $1,771

Quick Comments

	TCPYoonA:	Can'
	sRDreaM:

[TCPLemminks]

So I am currently really torn between the Leopold FC500R ($121) and the Ducky DK9008 Shine ($161) (shipping included).

[TCPYoonA]

I was originally going for the FC500R myself, until I decided to bite the bullet and wait for the 700R to come out (currently de-listed on PCCG). Pre-ordered and paid, now just waiting for it to arrive T__T

I'd say if you like the backlighting + those extra shortcut keys on the top right for the ducky, then go for it! My friend got a Ducky Shine just recently, but unfortunately it was DOA (one of the LEDs was broken, and the 'i' key wouldn't register) but they happily exchanged it the day after, and the replacement one has been working fine . A lot of people on the WP forums seem to have a good experience with the shine, if that equates to anything :P

If you can live with a minimalistic keyboard (I'm sure you can ) then just go with the FC500R. The only thing I don't like is the caps/scroll/numlock indicators being om the space on the top right. I suppose it would look rather bland if there was nothing there, but i prefer having some sort of LED indicator on the specific keys. Just my preference though.

If you don't need the numpad, then you can join me in the wait for the 700Rs to arrive on our shores :P

Quick Comments

TCPLemminks:

Numpad are awesome though -_-

[sRDreaM]

Originally Posted by TCPLemminks

So I am currently really torn between the Leopold FC500R ($121) and the Ducky DK9008 Shine ($161) (shipping included).

I own a Leopold FC500R Blue switch also owned a red switch before and have tried the Ducky Shine brown switches

Here are some of my thoughts:

Leopold FC500R - The quality of the keyboard is really good it is more of a simple mechanical keyboard but the interesting feature is that it's portable with the removable usb connector this allows you to easily take it around LAN parties and also if you ever accidentally step or damage the cable you can easily replace it. The build quality is actually better then Filco imo because of the improved key stabilizer (Yes I have used a Filco before) I don't want to go into to much details about that but you can search it up. I would recommend this keyboard as a Filco alternative and for people who want a non gimmick "gaming" mechanical keyboard.

Ducky Shine - You pay extra for LED lights and some extra features if you like looks I would recommend this the features are actually quite useful depending on the situation the only problem why I didn't buy the ducky shine over the Leopold was because I wanted a mechanical keyboard that last for avery long time and I was afraid that the led might die out over time also I wanted some portability the removable usb from the leopold makes me feel more comfortable of having it for a long time in case the cable ever gets damaged I can easily go out and buy a new one instead of replacing the keyboard as a whole.

In the end your decision comes down to personal preference just ask yourself these questions

Do I want a keyboard with good looks (led etc) = Ducky Shine
Do I just want a simple high-end mechanical keyboard? = Leopold save $$ too

Quick Comments

TCPLemminks:

kk thx I'll get the leopolds then

[TCPLemminks]

KK a huge thank you to everyone who contributed here, all parts have been ordered and I should be able to build it this weekend (sans graphics card because they are currently out of stock but should have some by next week). guys.
With remaining funds going to Diablo 3, that leaves around $150 which will be donated to this site .